7.62x54r AK
After finishing the psl up I thought it would be neat to have an AK in 7.62x54r also so I bought another PSL parts set for this build. Because the PSL has a bulged trunion like the Yugos I decided to use Yugo like wood.
Romanian PSL and rec for AK style build.
|
|
This pic was taken the day I test fired the rifle, you can see compared to the Bulgarian side folder that this gun is the same size as a std AK, the Bulgarian has had 1.5" removed from the bbl making it 16.25" with the muzzle device perm attached.
|
Rails machined from 4130
|
Rec riveted
|
Stock blanks and original Yugo stocks , because the psl trunion is loger than a std AK the forearm is slightly longer.
|
|
Newly machined walnut forearm
|
Here is a pic of my newly finished US made walnut forearm and buttstock. I believe in AK configuration that this rifle needs to be 922r compliant , currently it has the following US made parts, Buttstock, forearm, reciever, gas piston, grip, hammer, trigger, disconnector and muzzle device, putting me at least 2 or more parts over the required number of US made parts
|
psl/pslak/pslrail2.jpg